IDEAL WATER uses reverse osmosis, which has been proven for 50 years, to free the water from all existing impurities.
In reverse osmosis, the water to be purified is forced through a membrane at high pressure. This semi-permeable, compact membrane prevents even microscopic heavy metals, pesticides, microplastics, and volatile organic compounds from slipping through. Even fluoride and lead are out of luck. They all go straight down the drain. A high-quality reverse osmosis system can remove up to 99% of the pollutants in tap water, producing the purest water possible.

Let’s look at the natural water cycle for comparison. In nature’s cycle, water is purified of impurities by evaporation (distillation) because only water (H2O, consisting of two molecules of hydrogen and one molecule of oxygen) can change its aggregate state from liquid to gas. Solids and impurities thus remain behind.
The sun enlivens water with vital photons, the vibration of light. Stones in riverbeds, dissolved minerals, give it its natural flavor. The swirling increases the inner surface of the water, enriching it in this way with oxygen. It is free of pollutants, rich in oxygen and energy.
Here it becomes clear that reverse osmosis can consequently replace only the step of evaporation and lacks the other natural components of the water cycle.Both reverse osmosis and distillation devices lack the water revitalization by photons, the slight remineralization, as well as the oxygen enrichment by means of turbulence that occurs in the natural water cycle.
This is exactly where the patented IDEAL WATER technology comes in.
The water is freed from all impurities by the proven reverse osmosis and refined to IDEAL WATER by the patented IDEAL WATER technology.
The water is filtered, swirled and enriched with biophotons.
These are advantages that otherwise only pure spring water has. The entire treatment process thus consists of four steps:
– Water purification by pre- and molecular filtration
– water revitalization by photons, the oscillation of light
– Remineralization through schungite rock
– Oxygen enrichment through turbulence.

The combination of molecular filtration with remineralization by schungite, revitalization with photons and oxygenation by turbulence represents a unique selling point.

The result: purest, living, great-tasting water from your own waterworks in virtually unlimited quantities.

IDEAL WATER Direct Flow Systems

The IDEAL WATER direct-flow filtration system is designed specifically for households with limited space and/or increased water demand. The filtration capacity is approximately 1.5 liters per minute.
The direct flow process produces fresh water whenever you tap it. It is Ideal water from your own source.

Shapely faucet made of full stainless steel

The IDEAL WATER faucet is made of stainless steel. This gives you the assurance that no alloys are used which may contain heavy metals such as copper, lead or chromium and release them into the water.

If it is not possible to install the separate stainless steel faucet, we recommend so-called 3-way faucets.

IDEAL WATER – Certified components
We use only branded components of certified manufacturers.
– All fittings and water-carrying pipes are NSF certified.
– All seals are silicone seals according to the highest FDA standard (FDA: Food- and Drug-Administration).

Certified filtration performance
The IDEAL WATER – system protects you safely against uranium, heavy metals, pesticides, nanoplastic particles, nitrate, drug residues and many other contaminants in drinking water!
We will gladly provide you with the respective test reports upon request.
High quality Ideal Water Membrane
The IDEAL WATER – membrane is the heart of the filtration.
Only quality membranes of European manufacture with NSF certification and made of original FilmTec material are used.

Additional Aquastop
Included in the delivery of our systems is an Aquastop (also called water stop). This is a safety mechanism that, in the event of water leakage in the system, cuts off the water supply directly at the IDEAL WATER system inlet valve to prevent flooding.
IDEAL WATER – Integrated germ barrier
A germ barrier is integrated in our IDEAL WATER systems upstream of the tapping valve.
This ensures that no germs, bacteria or spores get into the Ideal Water. It prevents the system from being recontaminated by the tap.

Maintenance of Quick Change Filters
Quick Change filters consist of a filter head and a filter cartridge. They offer maximum hygienic safety. When the respective filter medium is changed, the housing is also automatically replaced, as the filter and housing form a single unit. This eliminates the cleaning and disinfection of the housing interior that is otherwise required with conventional systems.
The filters can be conveniently changed by the operator. Maintenance costs are reduced accordingly.

TÜV safety inspection
Safety in a filtration system is extremely important. TÜV Nord successfully carried out a pressure load test on an IDEAL WATER system. The system only burst at the very high pressure of 40 bar.

IDEAL WATER – Fits in every kitchen
An IDEAL WATER system fits into any kitchen. The space-saving design of the waterworks with a width/height of only 14 cm allows you to conveniently install it under your sink or under the baseboard of your kitchen.
Our detailed installation and operating instructions make it easy to install and maintain your system.

Solid workmanship “Handmade in Germany”
IDEAL WATER – water enhancement systems are installed in a solid metal frame. This effectively protects the attached parts from external damage.
Each system is carefully manufactured piece by piece by hand in Germany and tested for function in our technical department before delivery.

20 years of experience speak for us
IDEAL WATER has more than two decades of experience in building water filtration systems. IDEAL WATER therefore knows which details to pay attention to when building high-quality water filter systems.
The IDEAL WATER Group delivers what it promises and is happy to serve its customers.

IDEAL WATER – Team of experts
Ideal Water works with leading and renowned experts in the field of drinking water and health. In this way, the latest findings are always incorporated directly into the development of our quality products.

Installation:
The system is ideally installed standing up under the kitchen sink in the base cabinet, but it can also be installed in another base cabinet, or side room up to 5 meters away from the sink.
If there is not enough space, the system can be installed lying under the skirting board of the kitchen due to its small width. This requires a height of at least 150 mm.
The stainless steel water stainless steel faucet is usually installed directly next to your standard water tap in the kitchen sink.
If the sink is made of ceramic or a material in which it is not possible cannot be drilled, the stainless steel faucet can be installed in the countertop.
Alternatively, there is the possibility the installation of a “3-way faucet faucet” to replace your Water Faucet” . This faucet has 3 water circuits (cold water, hot water, ideal water). Please refer to our webshop for the surcharges for the 3 way faucets.
Each water system is individually tested for function and tightness before delivery, so that only the 3 connections (cold water connection, waste water connection and tap connection) have to be made during installation.
The Ideal Water systems are thus delivered ready for connection, including all necessary connection adapters and hose connections (5 m).
The Ideal Water Systems are delivered with a shapely stainless steel design faucet, incl. integrated swirl unit. This is installed directly in the sink.